Metal Detectors and VR Detectors by Vernell Electronics - Product information for all Metal Detectors

VR™ Remote Sensing Detector Systems are systems in our metal detectors using micro-processor driven, long distance locators capable of transmitting and receiving signals, from most elements, for distances up to a quarter mile. By using Harmonic Induction Discrimination in our metal detectors and a 360° multiplex signal we are able to pre-program our metal detectors to detect specific elements.

The ANOMALY QUALIFIER CIRCUIT™--which was invented by Vernell™ Electronics and is built into every VR™ 300-800 Series and the new Magnacast™ Series of metal detectors--allows the user to eliminate insignificant particles and oxidation by allowing the qualification of a signal and eliminating detection of unwanted targets. It also allows the metal detector user to predetermine the quality and quantity of the target prior to digging. This feature, in our metal detector products, has eliminated the need for the filters, amplifiers and parabolic antennas other detectors use.

VR™ 300-800

VR™ 900

VR™ 1000

MAGNACAST™ 5000
FORWARD GAUSS™

VR™ 300-800 Metal Detector Systems:

The VR™ 300, 400, 500, 600, 700 and 800 metal detector systems have the same appearance.

It is the internal systems and the elements for which they are programmed that determines the metal detector system number. Each element is indicated with an LED indicator light and selected by turning a pre-programmed selector switch on the detector.

.	Elements
System Number
300
300S
400
500
600
700
800

Elements programmed into
VR™ 300-800 Detector Systems

Each metal detector system includes a transmitter,receiver with belt clip,
transmitting probes, free-rotating extendable antenna rods, user
manual and is packed in a soft-side carrying case.

NOTE: The VR™800 metal detector system contains the Vernell 'Standard Six'™ configuration of elements.

VR™ 900 Metal Detector System: The VR™ 900 Metal Detector System includes the Vernell 'Standard Six'™ elements of the VR™ 800 but is manufactured with a more powerful (approximately twice as powerful as that of the VR™ 800), case-mounted transmitter. It includes a receiver with belt clip and includes a gel cell battery with a charger. The VR™ 900 metal detector is manufactured in a hard side, padded case.

VR™ 1000 Metal Detector System: The VR™ 1000 FORWARD GAUSS™ is an advanced metal detector system utilizing advanced FORWARD GAUSS™ technology that is both an audio and visual detector. This metal detector was first used in the field in 1984 and the FORWARD GAUSS™ technology that it uses has proven to be (by far) the most successful developed by Vernell™ Electronics.

This system was originally developed for professional archeologists and treasure hunters and has been used both on land and under water . With an original cost of $20,000, it was out of the reach of all but the most serious users. However, with the development of faster and more complex processing units and a reduction in the cost of materials, we were able to begin offering this breakthrough technology to the general public at a much more affordable cost. Part of the success of this metal detector system is that it does not look like a standard 'metal detector'. Instead, it has the appearance of a fine, well manufactured piece of scientific equipment that one might expect to find at an archeological site.

The VR™ 1000 FORWARD GAUSS™ is 'custom built' in a sturdy, hard side, padded case with two locks. The transmitter is case mounted and includes the Vernell 'Standard Six'™ elements with selector switch. The system includes an installed, rechargeable gel cell battery with charger, transmitting antenna, receiving rods and receiver with belt clip, headphones and user manual all inserted into the specially fitted case.

MAGNACAST™ 5000 FORWARD GAUSS Metal Detector™: The MAGNACAST™5000 FORWARD GAUSS™ Remote Sensing Detector System is the latest addition to our FORWARD GAUSS™ Series of dectors.. We have incorporated the power of FORWARD GAUSS™ technology into a detector system for the serious, professional relic and treasure hunter.

This is an updated system that utilizes our newest innovation the "SCAN GUN"™ receiving antenna and an adjustable power level that lets you set the system for close or long range detecting. It also brings back the ANOMALY QUALIFIER CIRCUIT™, invented by Vernell™ Electronics.
This is a fully electronic audio and visual detecting system that is that is surprisingly easy to use.

There is a built in speaker in the receiver so the user doesn't have to use headphones. The standard transmitter is configured with the Vernell™ 'Standard Six'™ elements, but it can be 'custom built' with other elements for additional charges.

This metal detector systems is fully self-contained in a sleek aluminum case and includes the transmitter, transmitting antenna with stand, receiver with neck strap, "SCAN GUN"™ receiving antenna, rechargeable gel cell battery with 110V charger, marker flags and user's manual.

To view or purchase our products, click HERE.

HOME Buy Products Product Info About Us Request Info
Downloads Contact Us Warranty Info Brochure Ordering Info